Daptor Two - Mobile Phone Audio Interface

Daptor Two

Remote Broadcasts over a cell phone?

Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. (We will provide adapters for all phones which do not have a 2.5mm jack). You can now send and receive audio from your mixer or tape recorder through the cell phone.

Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.

Audio Connections - You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks.

Daptor Two was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack. We do not provide this adapter.

Specifications
Inputs: XLR 600 ohms balanced, line level, 0 dBm max input.
1/4" mono, unbalanced, line level, 0 dBm max input.
Outputs: XLR 600 ohms balanced, mic level, -25 dBm avg output.
1/4" mono, unbalanced, mic level, -25 dBm avg output.
Passive, no AC or battery power needed.
Size: 11.2 x 6.9 x 3.5cm (4.4" x 2.7" x 1.2")
Weight: 200g

FAQs