VX8000-64i - Modular video / audio routing switcher

VX8000-64i

Features:

VX8000/64i/rear

Applications:

The VX8000-64i modular audio/video routing switcher is expandable to a 64x64 matrix in a single 9U rackframe. Matrix configurations are assembled by inserting cards onto the backplane in the rackframe. Crosspoint arrays are assembled by increments of eight. These 25 MHz matrix routing switchers route NTSC or PAL video and mono or stereo unbalanced audio. Audio can follow video or can be routed separately. The audio and video matrices do not need to be the same size.

In addition to routing audio, the optional Volume and Tone control (VT) package is available. The VT option allows full control of input and output levels, balance, and bass and treble for any audio signal directly from the VX8000-64i. Set variable audio input levels in to the VX8000-64i and control the output volume to each destination directly from the router. Tone adjustments can also be controlled for optimal audio quality.

Audio control features include input trim, variable audio output levels, loudness and mute. Output volume and balance controls allow for 1.25dB incremental adjustments, or levels can be pre-set. Input trim adjustments provide control of every audio input signal, which can be individually trimmed in 1.25dB increments to achieve input matching. Bass and treble control features offer full boost and cut capability. The loudness function, related to the Fletcher Munson curves, may be toggled on and off. Audio fade-out is enabled through the timed fader. The timed audio fade function offers a full-fade range of one-tenth of a second to 10 full seconds.

The VT features are controlled either via the front panel controller or through RS232. Optional Windows™ control software features a volume and tone control graphical user interface.

Part Number Guide

Basic Part Size Audio Layers Options
VX8000-64i/ 16x8/ = 16 inputs x 8 outputs
24x24/ = 24 inputs x 24 outputs
40x32/ = 40 inputs x 32 outputs
64x64/ = 64 inputs x 64 outpus
Input and output channels available in multiples of 8 from 16x8 to 64x64. The audio and video matrices do not need to be the same size.
V/ = Composite video only (no audio)
A/ = Unbalanced Mono
A-VT/ = Unbalanced Mono with Volume and Tone control
AA/ = Unbalanced Stereo
AA-VT/ = Unbalanced Stereo with Volume and Tone control
B/ = Balanced Mono
B-VT/ = Balanced Mono with Volume and Tone control
BB/ = Balanced Stereo
BB-VT/ = Balanced Stereo with Volume and Tone control
FPC = Front Panel Controller
IPO = Input Preview Option
Specifications
Analogue Video:
Inputs BNC-F 75 ohms, DC coupled
Outputs BNC-F 75 ohms, DC coupled
Frequency Response ±0.5dB to 20 MHz, -3dB @ 30 MHz
DC Offset <±10mV
Input & Output Levels Up to ±1.4V peak
Crosstalk <-50dB @ 4 MHz
Gain Unity ±0.2dB
Balanced Audio:
Inputs 2-part 3-way "Phoenix-type" connectors with screw terminals for +/-/Scn (bare wire), bridging or 600 ohm termination
Outputs 2-part 3-way "Phoenix-type" connectors with screw terminals for +/-/Scn (bare wire), bridging or 600 ohm termination
Frequency Response 20Hz to 50KHz ±0.25dB
Input & Output Levels 0, 4 or 16dB, clipping at 18dB
Crosstalk <-90dB @ 20KHz
Hum and Noise <-90dB
Unbalanced Audio:
Inputs RCA Phono, 100k ohms, DC coupled
Outputs RCA Phono, 500 ohms, DC coupled
Input Level Up to ±1.5V peak (+3dBu)
Output Level Up to ±3.0V peak (+9dBu)
Frequency Response ±0.25dB, 10Hz to 100kHz @ +3dBu
Crosstalk <-85dB @ 1kHz, -60dB @ 20kHz
Stereo Separation <-85dB @ 1kHz, -60dB @ 20kHz
Gain Unity ±0.2dB (all controls flat)
Hum and Noise <-85dBu, 22Hz to 22kHz
Total Harmonic Distortion <0.1% @ +3dBu
Intermodulation Distortion (SMPTE) <0.3% @ +3dBu
Control:
Serial RS-232 on D-9 (standard)
Front Panel Optional front panel controller with or without input preview option
Software Optional Windows™ control software including volume and tone GUI
Audio Functions: Output Volume
Input Trim
Bass Boost/Cut
Treble Boost/Cut
Left/Right Balance
Mute
Loudness
Timed Fader
Power Requirements:
Consumption ±8V DC nominal @ 5A
Input 100-120V or 200-240V AC, 47 to 63Hz, 150 Watts maximum
Physical:
Size 9-U x 19" rackmount chassis with hinged front panel - 483 x 400 x 254mm deep (19" x 15.75" x 10") approx