Control, automation and routing products for video, audio and data signals. Whether you want to switch between two inputs or thirty-two, control a matrix of ISDN lines and equipment or monitor station output for signal failure the answers are here...

BCU-300 - Broadcast Changeover Systems

The BCU-300 system provides a comprehensive solution to programme circuit backup for both video and audio.

NetControl 2000 IP Controller - For audio / video routing switchers

NetControl 2000 is an Internet Protocol (IP) control device designed to enable control of routing switchers via the Internet or via Ethernet on a local area network (LAN).

Remote Keypad Controller - For audio / video routing switchers

The Remote Controller is an RS232 terminal device which is designed to control the VX8X00 series of audio / video routing switchers from remote locations via three-wire hookup or modem.

RS Pushbutton / Infrared Controller - For VX8500 series routing switchers

RS Pushbutton / Infrared Controller is a serial communications device designed exclusively for remote control of any VX8500 series routing switcher.

Software & Other Controllers - For audio / video routing switchers

Windows Control software for Routers & Switchers, USB Adapter and Multilevel translator also increase control options.

V-Flex Series - Multi-media switchers

V-Flex-8 & V-Flex-16 - Cost-effective Multi-Media Matrix Routing Switchers

8x8 or 16x16 multi-layer switching with front panel, serial and IP control for Video, Audio and VGA.

VX-2004 & VX-2005 - Programme Fail Detectors

These Eurocard modules are designed to monitor video and audio signal continuity and provide alarm outputs in the event of signal loss.

VX-4026 - Universal relay switching Eurocards

These Eurocards are configurable, programmable modules suitable for routing broadcast video, audio and control signals.

VX8000-256MB, VX8000-256HB - 30MHz and 200MHz modular video / audio routing switchers

The VX8000-256MB and VX8000-256HB are expandable from 32x32 to 256x256 in a 12U rackframe and have the largest matrix capacity of all Vortex switchers.

VX8000-64i - Modular video / audio routing switcher

The VX8000-64i modular audio/video routing switcher is expandable from 16x8 to 64x64 matrix in a single 9U rackframe with remote control of volume and tone.

VX8000-MB, VX8000-HB - 30MHz and 200MHz modular video / audio routing switchers

The new VX8000-MB and VX8000-HB are modular 30MHz and 200MHz Bandwidth routing switchers expandable from 32x16 to 256x128 video and/or audio matrix in a 9U rackframe.

VX8500 4x4, 8x8 - Video / audio routing switcher

The VX8500 4x4 and 8x8 switchers are high performance full matrix audio/video routing switchers in a thin profile rackmount chassis. They accept and route almost any 1 volt Composite, Y/C or Component video input as well as balanced or unbalanced audio.

VX8500D - SDI (Serial Digital Interface) 8x8 routing switcher

VX8500D/8x8 SDI Matrix Routing Switcher is low cost and compatible with ITU-601, SMPTE 259m, D1, D2, D3. It is housed in a thin profile rackmount chassis.

VX8500-II - 16x16 routing switcher

The VX8500-II is a high performance 16x16 full matrix audio/video routing switcher. It accepts and routes almost any 1 volt Composite, Y/C, Component or SDI video input as well as balanced or unbalanced audio.

VX8500-II/D - 16x16 HD/SD-SDI Serial Digital Matrix Routing Switcher

The VX8500-II/D works with both HD-SDI and SD-SDI serial digital video signals, with or without embedded audio. It is low-cost and ideal for smaller studio and post-production applications with up to sixteen SDI Serial Digital Video sources that can be switched to any (one or more) of the sixteen SDI Serial Digital destinations.

VX8500-PRO - High performance 2 output routing switcher

The VX8500-PRO is a high performance 2 output audio/video routing switcher in a thin profile rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or Component video input as well as balanced or unbalanced audio.